Version bump

Reviewed-on: BSDCafe/checkmyip#2

README.md

@@ -1,29 +1,38 @@
 # CheckMyIP - [myip.bsd.cafe](https://myip.bsd.cafe)
 
-A Telnet, SSH and Simple HTTP Based Public IP Address Lookup Service
+A Telnet, SSH, DNS and Simple HTTP Based Public IP Address Lookup Service
 
 
 -----------------------------------------
 
 ### USAGE
 
--   **TELNET**:
+#### DNS
-    -   Default: `telnet myip.bsd.cafe`
+- **DNS TXT Record**:
-    -   IPv4: `telnet myip4.bsd.cafe`
+  - Retrieve your IP via a DNS TXT record: `dig +short myip.bsd.cafe TXT @myip.bsd.cafe`
-    -   IPv6: `telnet myip6.bsd.cafe`
+
--   **SSH**:
+#### Telnet
-    -   Default: `ssh myip.bsd.cafe`
+- **Default**: `telnet myip.bsd.cafe`
-    -   IPv4: `ssh myip4.bsd.cafe`
+- **IPv4**: `telnet myip4.bsd.cafe`
-    -   IPv6: `ssh myip6.bsd.cafe`
+- **IPv6**: `telnet myip6.bsd.cafe`
-    -   Your SSH client may require you to enter a username. You can use anything you want (`ssh -l imrootbitch myip.bsd.cafe`)
+
--   **CURL**:
+#### SSH
-    -   Default: `curl -L myip.bsd.cafe`
+- **Default**: `ssh myip.bsd.cafe`
-    -   IPv4: `curl -L myip4.bsd.cafe`
+- **IPv4**: `ssh myip4.bsd.cafe`
-    -   IPv6: `curl -L myip6.bsd.cafe`
+- **IPv6**: `ssh myip6.bsd.cafe`
--   **WGET**:
+- Your SSH client may require you to enter a username. You can use anything you want (`ssh -l username myip.bsd.cafe`)
-    -   Default: `wget -qO- myip.bsd.cafe`
+
-    -   IPv4: `wget -qO- myip4.bsd.cafe`
+#### CURL
-    -   IPv6: `wget -qO- myip6.bsd.cafe`
+- **Default**: `curl -L myip.bsd.cafe`
+- **IPv4**: `curl -L myip4.bsd.cafe`
+- **IPv6**: `curl -L myip6.bsd.cafe`
+
+#### WGET
+- **Default**: `wget -qO- myip.bsd.cafe`
+- **IPv4**: `wget -qO- myip4.bsd.cafe`
+- **IPv6**: `wget -qO- myip6.bsd.cafe`
+
+For HTTP (CURL and WGET above), use `myip.bsd.cafe/raw` to get only the IP address. This also works for the HTTP IPv4 and IPv6 addresses.
 
 -----------------------------------------
 ###   VERSION   ###
@@ -74,7 +83,7 @@ If you would rather set up your own private instance of CheckMyIP, then you can
 Install Dependencies (for example, on a FreeBSD jail)
 
 ```
-pkg install python39 py39-gssapi py39-paramiko
+pkg install python39 py39-gssapi py39-paramiko py39-dnspython
 ```
 
 Clone Repo and install
@@ -106,7 +115,7 @@ load_rc_config $name
 
 pidfile="/var/run/${name}.pid"
 command="/usr/local/bin/checkmyip.py"
-command_interpreter="/usr/local/bin/python3.9"
+command_interpreter="/usr/local/bin/python3.11"
 command_args="&"
 start_precmd="checkmyip_precmd"
 
@@ -127,22 +136,6 @@ service checkmyip enable
 service checkmyip start
 ```
 
-
------------------------------------------
-###   UPDATES IN V1.0.0 --> V1.1.0   ###
-
-**NEW FEATURES:**
-- Was seeing issues where SSH would be very slow to exchange. Likely related to log file sizes, so I change the logging function to turnover to new logging files every day.
-
-
------------------------------------------
-###   UPDATES IN V1.1.0 --> V1.3.0   ###
-
-- README updated for install on Ubuntu instead of CentOS
-- Small tweaks to support Python3
-
-
-
 -----------------------------------------
 ###   CONTRIBUTING   ###
 If you would like to help out by contributing code or reporting issues, please do!

checkmyip.py

@@ -1,18 +1,14 @@
-#!/usr/local/bin/python3.9
+#!/usr/local/bin/python3.11
-
-
-##### BSD Cafe CheckMyIP Server                #####
-##### Originally written by John W Kerns       #####
-##### http://blog.packetsar.com                #####
-##### Forked to BSD Cafe by Stefano Marinelli  #####	
-##### https://brew.bsd.cafe/BSDCafe/checkmyip  #####
 
+##### BSD Cafe CheckMyIP Server #####
+##### Originally written by John W Kerns #####
+##### Forked to BSD Cafe by Stefano Marinelli #####
+##### https://brew.bsd.cafe/BSDCafe/checkmyip #####
 
 ##### Inform version here #####
-version = "v1.3.0"
+version = "v1.3.2"
 
-
+##### Import necessary modules #####
-##### Import python2 native modules #####
 import os
 import sys
 import time
@@ -21,19 +17,34 @@ import json
 import jinja2
 import paramiko
 import threading
+from concurrent.futures import ThreadPoolExecutor
+from dnslib import DNSRecord, DNSHeader, RR, TXT, QTYPE
+import logging  # Use built-in logging module
 
+##### Configure Logging #####
+LOG_DIR = "/var/log/checkmyip/"
+os.makedirs(LOG_DIR, exist_ok=True)
+
+# General Logger
+logging.basicConfig(
+    level=logging.INFO,
+    format="%(asctime)s: %(message)s",
+    handlers=[
+        logging.FileHandler(os.path.join(LOG_DIR, f"{time.strftime('%Y-%m-%d')}_checkmyip.log")),
+        logging.StreamHandler(sys.stdout)
+    ]
+)
+
+# Paramiko Logger
+paramiko_log = os.path.join(LOG_DIR, f"{time.strftime('%Y-%m-%d')}_ssh.log")
+paramiko.util.log_to_file(paramiko_log)
 
 ##### Jinja formatting for logging queries #####
 j2log = "Connection from: {{ ip }} ({{ port }}) ({{ proto }})"
 
-
 ##### Jinja formatting for response queries #####
 j2send = """{
-
-
 "comment": "##     Your IP Address is {{ ip }} ({{ port }})     ##",
-
-
 "family": "{{ family }}",
 "ip": "{{ ip }}",
 "port": "{{ port }}",
@@ -43,276 +54,295 @@ j2send = """{
 "sponsor": "Served by BSD Cafe, https://bsd.cafe/"
 }""" % version
 
+##### DNS Server Functionality #####
+class DNSResponder:
+    def __init__(self, address='::', port=5553):
+        self.address = address
+        self.port = port
+        self.sock = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM)
+        self.sock.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)  # Enables dual-stack mode
+        self.sock.bind((self.address, self.port))
 
-##### Handles all prnting to console and logging to the logfile #####
+    def run(self):
-class log_management:
+        logging.info("DNS Server listening on port %s for both IPv4 and IPv6", self.port)
-	def __init__(self):
+        while True:
-		self.logpath = "/var/log/checkmyip/"  # Log file directory path
+            try:
-		self.logfile = "/var/log/checkmyip/%scheckmyip.log" % \
+                data, addr = self.sock.recvfrom(1024)
-			time.strftime("%Y-%m-%d_")  # Log file full path
+                threading.Thread(target=self.handle_query, args=(data, addr), daemon=True).start()
-		self.paramikolog = "/var/log/checkmyip/%sssh.log" % \
+            except Exception as e:
-			time.strftime("%Y-%m-%d_")  # SSH log file path
+                logging.error("DNS Server error: %s", e)
-		self.thread = threading.Thread(target=self._change_logfiles)
-		self.thread.daemon = True
-		self.thread.start()  # Start talker thread to listen to port
-		self._publish_methods()  # Publish the console and log methods to glob
-		self.can_log = True  # Variable used to check if we can log
-		try:  # Try to configure the SSH log file, create dir if fail
-			paramiko.util.log_to_file(self.paramikolog)
-		except IOError:
-			self._create_log_dir()
-	def _logger(self, data):  # Logging method published to global as 'log'
-		logdata = time.strftime("%Y-%m-%d %H:%M:%S") + ":   " + data + "\n"
-		if self.can_log:
-			try:  # Try to write to log, create log dir if fail
-				f = open(self.logfile, 'a')
-				f.write(logdata)
-				f.close()
-			except IOError:
-				self._console("Unable to log to logfile %s. Creating log directory" % self.logfile)
-				self.can_log = False
-				self._create_log_dir()
-		self._console(logdata)
-	def _console(self, data, timestamp=False):
-		if timestamp:
-			logdata = time.strftime("%Y-%m-%d %H:%M:%S") + ":   " + data + "\n"
-		else:
-			logdata = data
-		print(logdata)
-	def _publish_methods(self):
-		global log
-		global console
-		log = self._logger  # Global method used to write to the log file
-		console = self._console  # Global method used to write to the console
-	def _create_log_dir(self):  # Create the directory for logging
-		os.system('mkdir -p ' + self.logpath)
-		self._console("Logpath (%s) created" % self.logpath)
-		self.can_log = True
-	def _change_logfiles(self, thread=True):
-		while True:
-			time.sleep(10)
-			self.logfile = "/var/log/checkmyip/%scheckmyip.log" % \
-				time.strftime("%Y-%m-%d_")  # Log file full path
-			self.paramikolog = "/var/log/checkmyip/%sssh.log" % \
-				time.strftime("%Y-%m-%d_")  # SSH log file path
-			paramiko.util.log_to_file(self.paramikolog)
 
+    def handle_query(self, data, addr):
+        try:
+            request = DNSRecord.parse(data)
+            qname = request.q.qname
+            qtype = request.q.qtype
+            ip, port, *_ = addr  # Get IP and port; ignore other details
 
-##### Creates a RSA key for use by paramiko #####
+            # Normalize IPv6 address (remove IPv4 mapping if exists)
-class rsa_key:
+            if ip.startswith("::ffff:"):
-	data = """-----BEGIN RSA PRIVATE KEY-----
+                ip = ip[7:]
-	MIICWgIBAAKBgQDTj1bqB4WmayWNPB+8jVSYpZYk80Ujvj680pOTh2bORBjbIAyz
-	oWGW+GUjzKxTiiPvVmxFgx5wdsFvF03v34lEVVhMpouqPAYQ15N37K/ir5XY+9m/
-	d8ufMCkjeXsQkKqFbAlQcnWMCRnOoPHS3I4vi6hmnDDeeYTSRvfLbW0fhwIBIwKB
-	gBIiOqZYaoqbeD9OS9z2K9KR2atlTxGxOJPXiP4ESqP3NVScWNwyZ3NXHpyrJLa0
-	EbVtzsQhLn6rF+TzXnOlcipFvjsem3iYzCpuChfGQ6SovTcOjHV9z+hnpXvQ/fon
-	soVRZY65wKnF7IAoUwTmJS9opqgrN6kRgCd3DASAMd1bAkEA96SBVWFt/fJBNJ9H
-	tYnBKZGw0VeHOYmVYbvMSstssn8un+pQpUm9vlG/bp7Oxd/m+b9KWEh2xPfv6zqU
-	avNwHwJBANqzGZa/EpzF4J8pGti7oIAPUIDGMtfIcmqNXVMckrmzQ2vTfqtkEZsA
-	4rE1IERRyiJQx6EJsz21wJmGV9WJQ5kCQQDwkS0uXqVdFzgHO6S++tjmjYcxwr3g
-	H0CoFYSgbddOT6miqRskOQF3DZVkJT3kyuBgU2zKygz52ukQZMqxCb1fAkASvuTv
-	qfpH87Qq5kQhNKdbbwbmd2NxlNabazPijWuphGTdW0VfJdWfklyS2Kr+iqrs/5wV
-	HhathJt636Eg7oIjAkA8ht3MQ+XSl9yIJIS8gVpbPxSw5OMfw0PjVE7tBdQruiSc
-	nvuQES5C9BMHjF39LZiGH1iLQy7FgdHyoP+eodI7
-	-----END RSA PRIVATE KEY-----
-	"""
-	def readlines(self):  # For use by paramiko.RSAKey.from_private_key mthd
-		return self.data.split("\n")
-	def __call__(self):  # Recursive method uses own object as arg when called
-		return paramiko.RSAKey.from_private_key(self)
 
+            # Only respond to TXT queries for myip.bsd.cafe
+            if qname.matchGlob('myip.bsd.cafe') and qtype == QTYPE.TXT:
+                response = DNSRecord(DNSHeader(id=request.header.id, qr=1, aa=1, ra=1), q=request.q)
+                response.add_answer(RR(qname, QTYPE.TXT, ttl=60, rdata=TXT(ip)))
+                self.sock.sendto(response.pack(), addr)
+        except Exception as e:
+            logging.error("Error handling DNS query: %s", e)
+
+##### Creates an RSA key for use by paramiko #####
+class RSAKey:
+    data = """-----BEGIN RSA PRIVATE KEY-----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+-----END RSA PRIVATE KEY-----
+"""
+    def readlines(self):  # For use by paramiko.RSAKey.from_private_key
+        return self.data.split("\n")
+
+    def get_key(self):
+        return paramiko.RSAKey.from_private_key(self)
 
 ##### Imports and modifies the ServerInterface module for use by paramiko #####
-class ssh_server (paramiko.ServerInterface):
+class SSHServer(paramiko.ServerInterface):
-	def __init__(self):
+    def __init__(self):
-		self.event = threading.Event()
+        self.event = threading.Event()
-	def check_channel_request(self, kind, chanid):
-		if kind == 'session':
-			return paramiko.OPEN_SUCCEEDED
-		return paramiko.OPEN_FAILED_ADMINISTRATIVELY_PROHIBITED
-	def check_auth_none(self, username):  # Auth none method left wide open
-		return paramiko.AUTH_SUCCESSFUL
-	def get_allowed_auths(self, username):  # Give no auth options
-		return 'none'
-	def check_channel_shell_request(self, channel):
-		self.event.set()
-		return True
-	def check_channel_pty_request(self, channel, term, width, height,
-								   pixelwidth, pixelheight, modes):
-		return True
 
+    def check_channel_request(self, kind, chanid):
+        if kind == 'session':
+            return paramiko.OPEN_SUCCEEDED
+        return paramiko.OPEN_FAILED_ADMINISTRATIVELY_PROHIBITED
+
+    def check_auth_none(self, username):
+        return paramiko.AUTH_SUCCESSFUL
+
+    def get_allowed_auths(self, username):
+        return 'none'
+
+    def check_channel_shell_request(self, channel):
+        self.event.set()
+        return True
+
+    def check_channel_pty_request(self, channel, term, width, height, pixelwidth, pixelheight, modes):
+        return True
 
 ##### Method to merge Jinja templates #####
 def j2format(j2tmp, valdict):
-	template = jinja2.Template(j2tmp)
+    template = jinja2.Template(j2tmp)
-	return template.render(valdict).replace("\n", "\r\n")
+    return template.render(valdict).replace("\n", "\r\n")
-
 
 ##### Cleans IP addresses coming from socket library #####
 def cleanip(addr):
-	ip, port = addr[:2]
+    ip, port = addr[:2]
-	family = "ipv6"  # Default to IPv6
+    family = "ipv6"  # Default to IPv6
-	if ip.startswith("::ffff:"):  # Check if this is a prefixed IPv4 address
+    if ip.startswith("::ffff:"):  # Check if this is a prefixed IPv4 address
-		ip = ip.replace("::ffff:", "")  # Clean the IP
+        ip = ip.replace("::ffff:", "")  # Clean the IP
-		family = "ipv4"
+        family = "ipv4"
-	elif ":" not in ip:  # Simple check to recognize IPv4
+    elif ":" not in ip:  # Simple check to recognize IPv4
-		family = "ipv4"
+        family = "ipv4"
-	return ip, port, family  # Return cleaned IP and family
+    return ip, port, family  # Return cleaned IP and family
 
-
+##### TCP listener methods using ThreadPoolExecutor for better thread management #####
-##### TCP listener methods. Gets used once for each listening port #####
+def listener(port, talker, executor):
-def listener(port, talker):
+    listen_ip = ''
-	listen_ip = ''
+    listen_port = port
-	listen_port = port
+    buffer_size = 1024
-	buffer_size = 1024
+    while True:
-	while True:
+        try:
-		# Use AF_INET6 but also handle IPv4 connections
+            # Use AF_INET6 but also handle IPv4 connections
-		sock = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
+            sock = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
-		sock.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)  # Allow IPv4-mapped IPv6 addresses
+            sock.setsockopt(socket.IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)  # Allow IPv4-mapped IPv6 addresses
-		sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
+            sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
-		sock.bind((listen_ip, listen_port))
+            sock.bind((listen_ip, listen_port))
-		sock.listen(buffer_size)
+            sock.listen(buffer_size)
-		while True:
+            logging.info("Listening on port %s", listen_port)
-			client, addr = sock.accept()
+            while True:
-			ip, port, family = cleanip(addr)  # Get cleaned IP info including family
+                client, addr = sock.accept()
-			valdict = {"ip": ip, "port": port, "family": family, "proto": ""}
+                ip, port, family = cleanip(addr)  # Get cleaned IP info including family
-			thread = threading.Thread(target=talker, args=(client, valdict))
+                valdict = {"ip": ip, "port": port, "family": family, "proto": ""}
-			thread.start()  # Start talker thread to listen to port
+                executor.submit(talker, client, valdict)  # Submit to thread pool
+        except Exception as e:
+            logging.error("Listener on port %s encountered an error: %s", port, e)
+            time.sleep(5)  # Wait before retrying
 
 ##### Telnet responder method. Is run in own thread for each telnet query #####
 def telnet_talker(client, valdict, proto="telnet"):
-	valdict.update({"proto": proto})  # Add the protocol to the value dict
+    try:
-	log(j2format(j2log, valdict))  # Log the query to the console and logfile
+        valdict.update({"proto": proto})  # Add the protocol to the value dict
-	# Send the query response
+        logging.info(j2format(j2log, valdict))  # Log the query
-	client.send(f'{j2format(j2send, valdict)}\n'.encode())
+        # Send the query response
-	client.close()  # Close the channel
+        response = j2format(j2send, valdict) + "\n"
-
+        client.sendall(response.encode())
+    except Exception as e:
+        logging.error("Telnet talker error: %s", e)
+    finally:
+        client.close()  # Ensure the socket is closed
 
 ##### SSH responder method. Gets run in own thread for each SSH query #####
 def ssh_talker(client, valdict, proto="ssh"):
-	def makefile():  # A hack to make Cisco SSH sessions work properly
-		chan.makefile('rU').readline().strip('\r\n')
-	valdict.update({"proto": proto})
-	log(j2format(j2log, valdict))
-	t = paramiko.Transport(client, gss_kex=True)
-	t.set_gss_host(socket.getfqdn(""))
-	t.load_server_moduli()
-	t.add_server_key(rsa_key()())  # RSA key object nested call
-	server = ssh_server()
-	t.start_server(server=server)
-	chan = t.accept(20)
-	if chan:
-		server.event.wait(10)
-		chan.send('%s\n' % j2format(j2send, valdict))  # Send the response
-		thread = threading.Thread(target=makefile)
-		thread.start()  # Start hack in thread since it hangs indefinately
-		time.sleep(1)  # Wait a second
-		chan.close()  # And kill the SSH channel
-	client.close()  # And kill the session
-
-
-##### HTTP responder method. Gets run in own thread for each HTTP query #####
-##### Automatically detects if client is a browser or a telnet client   #####
-##### HTTP responder method. Gets run in own thread for each HTTP query #####
-def http_talker(client, valdict, proto="http"):
-    time.sleep(.1)  # Sleep to allow the client to send some data
-    client.setblocking(0)  # Set the socket recv as non-blocking
-    browser = False  # Is the client using a browser?
-    headers = {}
     try:
-        data = client.recv(2048)  # Receive data from the buffer (if any)
+        def makefile(chan):
-        request_lines = data.decode().split('\r\n')
+            # A hack to make SSH sessions work properly
-        for line in request_lines:
+            chan.makefile('rU').readline().strip('\r\n')
-            if ": " in line:
+
-                key, value = line.split(": ", 1)
-                headers[key] = value
-        # Extract real IP and adjust family based on headers if present
-        if 'X-Real-IP' in headers or 'X-Forwarded-For' in headers:
-            real_ip = headers.get('X-Real-IP', headers.get('X-Forwarded-For').split(',')[0])
-            ip, port, family = cleanip((real_ip, valdict['port']))
-            valdict.update({"ip": ip, "family": family})
-        browser = True  # Set client browser to True
-    except socket.error:  # If buffer was empty, then like a telnet client on TCP80
-        browser = False  # Set client browser to False
-    if not browser:  # If the client is not a browser
-        telnet_talker(client, valdict, "http-telnet")  # Hand to telnet_talker
-    else:  # If client is a browser
-        # Proceed with standard HTTP response (with headers)
         valdict.update({"proto": proto})
-        log(j2format(j2log, valdict))
+        logging.info(j2format(j2log, valdict))
-        response_body_raw = j2format(j2send, valdict)+"\n"
+        t = paramiko.Transport(client)
-        if request_lines[0].split()[1] == "/raw":
+        t.set_gss_host(socket.getfqdn(""))
-            json_content = json.loads(response_body_raw)
+        t.load_server_moduli()
-            response_body_raw = json_content['ip']
+        t.add_server_key(RSAKey().get_key())  # RSA key object
-        response_headers_raw = """HTTP/1.1 200 OK
+        server = SSHServer()
-Content-Length: %s
+        t.start_server(server=server)
-Content-Type: application/json; encoding=utf8
+
-Connection: close""" % str(len(response_body_raw))  # Response with headers
+        chan = t.accept(20)
-        client.send(f'{response_headers_raw}\n\n{response_body_raw}'.encode())
+        if chan:
+            if not server.event.wait(10):
+                logging.warning("No shell request received.")
+                chan.close()
+            else:
+                response = j2format(j2send, valdict) + "\n"
+                chan.send(response)
+                threading.Thread(target=makefile, args=(chan,), daemon=True).start()
+                time.sleep(1)
+                chan.close()
+    except Exception as e:
+        logging.error("SSH talker error: %s", e)
+    finally:
         client.close()
 
+##### HTTP responder method. Gets run in own thread for each HTTP query #####
+def http_talker(client, valdict, proto="http"):
+    try:
+        time.sleep(0.1)  # Allow client to send data
+        client.settimeout(5.0)  # Set timeout to prevent blocking indefinitely
+        browser = False  # Is the client using a browser?
+        headers = {}
+        try:
+            data = client.recv(2048)  # Receive data from the buffer (if any)
+            if data:
+                request_lines = data.decode().split('\r\n')
+                for line in request_lines:
+                    if ": " in line:
+                        key, value = line.split(": ", 1)
+                        headers[key] = value
+                # Extract real IP and adjust family based on headers if present
+                if 'X-Real-IP' in headers or 'X-Forwarded-For' in headers:
+                    real_ip = headers.get('X-Real-IP', headers.get('X-Forwarded-For').split(',')[0])
+                    ip, port, family = cleanip((real_ip, valdict['port']))
+                    valdict.update({"ip": ip, "family": family})
+                browser = True  # Set client browser to True
+        except socket.timeout:
+            browser = False  # Set client browser to False
+        except Exception as e:
+            logging.error("HTTP talker recv error: %s", e)
+            browser = False
 
+        if not browser:  # If the client is not a browser
+            telnet_talker(client, valdict, "http-telnet")  # Hand to telnet_talker
+        else:  # If client is a browser
+            valdict.update({"proto": proto})
+            logging.info(j2format(j2log, valdict))
+            response_body_raw = j2format(j2send, valdict) + "\n"
+            if request_lines and "/raw" in request_lines[0]:
+                try:
+                    json_content = json.loads(response_body_raw)
+                    response_body_raw = json_content.get('ip', '')
+                except json.JSONDecodeError:
+                    response_body_raw = "Invalid JSON response."
+            response_headers_raw = (
+                "HTTP/1.1 200 OK\r\n"
+                f"Content-Length: {len(response_body_raw)}\r\n"
+                "Content-Type: application/json; charset=utf-8\r\n"
+                "Connection: close\r\n\r\n"
+            )
+            client.sendall(response_headers_raw.encode() + response_body_raw.encode())
+    except Exception as e:
+        logging.error("HTTP talker error: %s", e)
+    finally:
+        client.close()  # Ensure the socket is closed
 
 ##### Server startup method. Starts a listener thread for each TCP port #####
 def start():
-	talkers = {2222: ssh_talker, 2223: telnet_talker,
+    talkers = {
-	2280: http_talker}  # Three listeners on different ports
+        2222: ssh_talker,
-	for talker in talkers:
+        2223: telnet_talker,
-		# Launch a thread for each listener
+        2280: http_talker
-		thread = threading.Thread(target=listener,
+    }  # Three listeners on different ports
-			args=(talker, talkers[talker]))
+    max_workers = 100  # Define maximum number of threads
-		thread.daemon = True
+    with ThreadPoolExecutor(max_workers=max_workers) as executor:
-		thread.start()
+        for port, talker in talkers.items():
-	while True:  # While loop to allow a CTRL-C interrupt when interactive
+            # Launch a thread for each listener
-		try:
+            threading.Thread(target=listener, args=(port, talker, executor), daemon=True).start()
-			time.sleep(1)
+        # Start DNS server in a new thread
-		except KeyboardInterrupt:
+        dns_server = DNSResponder(port=5553)  # Assuming DNS is on port 5553 as per original code
-			quit()
+        threading.Thread(target=dns_server.run, daemon=True).start()
-
+        logging.info("All services started.")
+        while True:  # Keep the main thread alive
+            try:
+                time.sleep(1)
+            except KeyboardInterrupt:
+                logging.info("Shutting down server.")
+                sys.exit(0)
 
 ##### Client class to be used to make API calls to CheckMyIP server #####
 class CheckMyIP_Client:
-	def __init__(self):
+    def __init__(self):
-		self._json = __import__('json')  # Import the JSON library
+        self._json = json  # Direct reference to json module
-		self._socket = __import__('socket')  # Import the socket library
+        self._socket = socket  # Direct reference to socket module
-		self._raw_data = None  # Initialize the _raw_data variable
+        self._raw_data = None  # Initialize the _raw_data variable
-		self._data = None  # Initialize the _data variable
+        self._data = None  # Initialize the _data variable
-		self._af = "auto"  # Set the IP address family type to "auto"
+        self._af = "auto"  # Set the IP address family type to "auto"
-		self.server = "telnetmyip.com"  # Set the default CheckMyIP server
+        self.server = "telnetmyip.com"  # Set the default CheckMyIP server
-	def get(self):  # Primary method to run IP check
+
-		if self._af == "auto":  # If we are using an auto address family
+    def get(self):  # Primary method to run IP check
-			try:  # Try using IPv6
+        sock = None
-				sock = self._socket.socket(self._socket.AF_INET6,
+        try:
-				self._socket.SOCK_STREAM)
+            if self._af == "auto":  # If we are using an auto address family
-				sock.connect((self.server, 23))
+                try:  # Try using IPv6
-			except:  # Fall back to IPv4 if IPv6 fails
+                    sock = self._socket.socket(self._socket.AF_INET6, self._socket.SOCK_STREAM)
-				sock = self._socket.socket(self._socket.AF_INET,
+                    sock.connect((self.server, 23))
-				self._socket.SOCK_STREAM)
+                except:  # Fall back to IPv4 if IPv6 fails
-				sock.connect((self.server, 23))
+                    sock = self._socket.socket(self._socket.AF_INET, self._socket.SOCK_STREAM)
-		elif self._af == "ipv6":  # If we are using the IPv6 address family
+                    sock.connect((self.server, 23))
-			sock = self._socket.socket(self._socket.AF_INET6,
+            elif self._af == "ipv6":  # If we are using the IPv6 address family
-			self._socket.SOCK_STREAM)
+                sock = self._socket.socket(self._socket.AF_INET6, self._socket.SOCK_STREAM)
-			sock.connect((self.server, 23))
+                sock.connect((self.server, 23))
-		elif self._af == "ipv4":  # If we are using the IPv4 address family
+            elif self._af == "ipv4":  # If we are using the IPv4 address family
-			sock = self._socket.socket(self._socket.AF_INET,
+                sock = self._socket.socket(self._socket.AF_INET, self._socket.SOCK_STREAM)
-			self._socket.SOCK_STREAM)
+                sock.connect((self.server, 23))
-			sock.connect((self.server, 23))
+            self._raw_data = sock.recv(1024).decode()
-		self._raw_data = sock.recv(1024).decode()
+            self._data = self._json.loads(self._raw_data)  # Receive data from the buffer
-		self._data = self._json.loads(self._raw_data)  # Recieve data from the buffer
+            return self._data  # Return the JSON data
-		sock.close()  # Close the socket
+        except Exception as e:
-		return self._data  # Return the JSON data
+            logging.error("CheckMyIP_Client error: %s", e)
-	def set_family(self, family):  # Method to set the IP address family
+            return None
-		allowed = ["auto", "ipv4", "ipv6"]  # Allowed input values
+        finally:
-		if family in allowed:
+            if sock:
-			self._af = family
+                sock.close()  # Ensure the socket is closed
-		else:
+
-			raise Exception("Allowed families are 'auto', 'ipv4', 'ipv6'")
+    def set_family(self, family):  # Method to set the IP address family
+        allowed = ["auto", "ipv4", "ipv6"]  # Allowed input values
+        if family in allowed:
+            self._af = family
+        else:
+            raise ValueError("Allowed families are 'auto', 'ipv4', 'ipv6'")
 
 ### CheckMyIP_Client Example Usage ###
-#client = CheckMyIP_Client()
+# client = CheckMyIP_Client()
-#client.get()
+# data = client.get()
-
+# print(data)
 
 if __name__ == "__main__":
-	logging = log_management()  # Instantiate log class
+    start()  # Start the server
-	start()  # Start the server