# RETRO FORTH ## Background Retro is a dialect of Forth. It builds on the barebones Rx core, expanding it into a flexible and useful language. Over the years the language implementation has varied substantially. Retro began in 1998 as a 16-bit assembly implementation for x86 hardware, evolved into a 32-bit system with cmForth and ColorForth influences, and eventually started supporting mainstream OSes. Later it was rewritten for a small, portable virtual machine. This is the twelfth generation of Retro. It targets a virtual machine (called Nga) and runs on a wide variety of host systems. ### Namespaces Various past releases have had different methods of dealing with the dictionary. I have settled on using a] single global dictionary, with a convention of using a short namespace prefix for grouping related words. This was inspired by Ron Aaron's 8th language. The main namespaces are: | namespace | words related to | | ---------- | ------------------ | | ASCII | ASCII Constants | | c | characters | | compile | compiler functions | | d | dictionary headers | | err | error handlers | | n | numbers | | s | strings | | set | sets (arrays) | | v | variables | This makes it very easy to identify related words, especially across namespaces. E.g., c:put c:to-upper s:put s:to-upper ### Prefixes Prefixes are an integral part of Retro. These are single symbol modifiers added to the start of a word which control how Retro processes the word. The interpreter model is covered in *Rx.md*, but basically: - Get a token (whitespace delimited string) - Pass it to `interpret` + if the token starts with a known prefix then pass it to the prefix handler + if the initial character is not a known prefix, look it up - if found, push the address ("xt") to the stack and call the word's class handler - if not found call `err:not-found` - repeat as needed This is different than the process in traditional Forth. A few observations: - there are no parsing words - numbers are handled using a prefix - prefixes can be added or changed at any time The basic prefixes are: | prefix | used for | | ------ | ---------------------- | | : | starting a definition | | & | obtaining pointers | | ( | stack comments | | ` | inlining bytecodes | | ' | strings | | # | numbers | | $ | characters | | @ | variable get | | ! | variable set | ### Naming and Style Conventions * Names should start with their namespace (if appropriate) * Word names should be lowercase * Variable names should be Title case * Constants should be UPPERCASE * Names may not start with a prefix character * Names returning a flag should end with a ? * Words with an effect on the stack should have a stack comment ## Code Begins Memory Map This assumes that the VM defines an image as being 524,288 cells. Nga implementations may provide varying amounts of memory, so the specific addresses will vary. | RANGE | CONTAINS | | --------------- | ---------------------------- | | 0 - 1024 | rx kernel | | 1025 - 1535 | token input buffer | | 1536 + | start of heap space | | ............... | free memory for your use | | 506879 | buffer for string evaluate | | 507904 | temporary strings (32 * 512) | | 524287 | end of memory | I provide a word, `EOM`, which returns the last addressable location. This will be used by the words in the `s:` namespace to allocate the temporary string buffers at the end of memory. ~~~ :EOM (-n) #-3 fetch ; ~~~ ## Stack Depth `depth` returns the number of items on the data stack. This is provided by the VM upon reading from address *-1*. ~~~ :depth (-n) #-1 fetch ; ~~~ ## Stack Comments Stack comments are terse notes that indicate the stack effects of words. While not required, it's helpful to include these. They take a form like: (takes-returns) I use a single character for each input and output item. These will often (though perhaps not always) be: n, m, x, y number a, p pointer q quotation (pointer) d dictionary header (pointer) s string c character (ASCII) ## Dictionary Shortcuts I define a few words in the `d:` namespace to make it easier to operate on the most recent header in the dictionary. These return the values in specific fields of the header. ~~~ :d:last (-d) &Dictionary fetch ; :d:last (-a) d:last d:xt fetch ; :d:last (-a) d:last d:class fetch ; :d:last (-s) d:last d:name ; ~~~ ## Changing A Word's Class Handler I implement `reclass` to change the class of the most recent word. ~~~ :reclass (a-) d:last d:class store ; ~~~ With this I can then define `immediate` (for state-smart words) and `data` to tag data words. ~~~ :immediate (-) &class:macro reclass ; :data (-) &class:data reclass ; ~~~ ~~~ :primitive (-) &class:primitive reclass ; ~~~ ## Optimizations & Compiler Extensions I have a `compile` namespace for some low level words that compile specific Nga bytecode. This is intended to aid in readability when constructing compiler extensions. ~~~ :compile:lit (a-) #1 , , ; :compile:jump (a-) #1793 , , ; :compile:call (a-) #2049 , , ; :compile:ret (-) #10 , ; ~~~ The compiler state is stored in a value named `Compiler`. I have an accessor word that aids in readability. ~~~ :compiling? (-f) &Compiler fetch ; ~~~ It's sometimes useful to inline values directly. I use a backtick prefix for this. ~~~ :prefix:` (s-) s:to-number , ; immediate ~~~ It's traditional to have a word named `here` which returns the next free address in memory. ~~~ :here (-a) &Heap fetch ; ~~~ ## Variables The next two are additional prefixes to make working with variables a bit less painful. By default you have to do things like: &Name fetch #10 * &Name store Or using combinators: &Name [ fetch #10 * ] sip store With the @ and ! prefixes this can become: @Name #10 * !Name When compiling, these will generate packed Nga instructions corresponding to: lit + fetch + nop + nop 'life.... #3841 lit + store + nop + nop 'list.... #4097 ~~~ :prefix:@ (s-n) d:lookup d:xt fetch compiling? [ (life....) #3841 , , ] [ fetch ] choose ; immediate :prefix:! (s-n) d:lookup d:xt fetch compiling? [ (list....) #4097 , , ] [ store ] choose ; immediate ~~~ The next few words aren't actually useful until the `s:` namespace is defined. With strings and the `'` prefix they allow creation of variables and constants. | To create a | Use a form like | | ---------------------------- | ------------------ | | Variable | `'Base var` | | Variable, with initial value | `#10 'Base var` | | Constant | `#-1 'TRUE const` | The lower level kernel provides `d:add-header` to make a new header. This is a bit ugly to use as most of the time I don't need all of the flexibility it provides. Here I add a word to create a new header pointing to `here`. This is then used to build other data structures without invoking the `:` compiler. ~~~ :d:create (s-) (s-) &class:data #0 d:add-header here d:last d:xt store ; ~~~ And then the others are trivial. ~~~ :var (s-) d:create #0 , ; :var (ns-) d:create , ; :const (ns-) d:create d:last d:xt store ; ~~~ The `const` word is an example of using the dictionary and word classes to do some optimization.It creates a header, with a class of `class:data`, then sets the execution pointer to the desired value. Since the data class either leaves the word pointer on the stack or compiles it as a literal into a definition, this allows constants to exist as just a header with no extra runtime code. ## Stack Shufflers The core Rx language provides a few basic stack shuffling words: `push`, `pop`, `drop`, `swap`, and `dup`. There are quite a few more that are useful. Some of these are provided here. Most of these are implemented as raw bytecodes which can be inlined when used in definitions. The high level definitions are: :tuck (xy-yxy) dup push swap pop ; :over (xy-xyx) push dup pop swap ; :nip (xy-y) swap drop ; :drop-pair (nn-) drop drop ; And the low level forms: ~~~ :tuck (xy-yxy) `100926722 ; primitive :over (xy-xyx) `67502597 ; primitive :nip (xy-y) `772 ; primitive :drop-pair (nn-) `771 ; primitive :?dup (n-nn|n-n) `6402 ; primitive :dup-pair (xy-xyxy) over over ; ~~~ ## Combinators Retro makes use of anonymous functions called *quotations* for much of the execution flow and stack control. The words that operate on these quotations are called *combinators*. Combinators are a major part of using Retro. They help in reducing the use of lower level shuffling and allow for a greater overall consistency in the syntax. I also find them to help in reducing visual noise. ### Combinators: Data `dip` executes a quotation after moving a value off the stack. The value is restored after execution completes. These are equivilent: #10 #12 [ #3 - ] dip #10 #12 push #3 - pop ~~~ :dip (nq-n) swap push call pop ; ~~~ `sip` is similar to dip, but leaves a copy of the value on the stack while the quotation is executed. These are equivilent: #10 [ #3 * ] sip #10 dup push #3 * pop ~~~ :sip (nq-n) push dup pop swap &call dip ; ~~~ Apply each quote to a copy of x. ~~~ :bi (xqq-) &sip dip call ; ~~~ Apply q1 to x and q2 to y. ~~~ :bi* (xyqq-) &dip dip call ; ~~~ Apply q to x and y. ~~~ :bi@ (xyq-) dup bi* ; ~~~ Apply each quote to a copy of x. ~~~ :tri (xqqq-) [ &sip dip sip ] dip call ; ~~~ Apply q1 to x, q2 to y, and q3 to z. ~~~ :tri* (xyzqqq-) [ [ swap &dip dip ] dip dip ] dip call ; ~~~ Apply q to x, y, and z. ~~~ :tri@ dup dup tri* ; ~~~ ### Combinators: Control Execute quote until quote returns a flag of 0. ~~~ :while (q-) [ repeat dup dip swap 0; drop again ] call drop ; ~~~ Execute quote until quote returns a non-zero flag. ~~~ :until (q-) [ repeat dup dip swap #-1 xor 0; drop again ] call drop ; ~~~ The `times` combinator runs a quote (n) times. ~~~ :times (nq-) swap [ repeat 0; #1 - push &call sip pop again ] call drop ; ~~~ `case` is a conditional combinator. It's actually pretty useful. What it does is compare a value on the stack to a specific value. If the values are identical, it discards the value and calls a quote before exiting the word. Otherwise it leaves the stack alone and allows execution to continue. Example: :c:vowel? $a [ TRUE ] case $e [ TRUE ] case $i [ TRUE ] case $o [ TRUE ] case $u [ TRUE ] case drop FALSE ; ~~~ :case [ over eq? ] dip swap [ nip call #-1 ] [ drop #0 ] choose 0; pop drop drop ; :s:case [ over s:eq? ] dip swap [ nip call #-1 ] [ drop #0 ] choose 0; pop drop drop ; ~~~ ## A Shortcut ~~~ :prefix:| d:lookup [ d:xt fetch ] [ d:class fetch ] bi compiling? [ [ class:data ] dip compile:call ] [ call ] choose ; immediate ~~~ ## Conditionals Taking a break from combinators for a bit, I turn to some words for comparing things. First, constants for TRUE and FALSE. Due to the way the conditional execution works, only these values can be used. This is different than in a traditional Forth, where non-zero values are true. ~~~ :TRUE (-n) #-1 ; :FALSE (-n) #0 ; ~~~ The basic Rx kernel doesn't provide two useful forms which I'll provide here. ~~~ :lteq? (nn-f) dup-pair eq? [ lt? ] dip or ; :gteq? (nn-f) dup-pair eq? [ gt? ] dip or ; ~~~ And then some numeric comparators. ~~~ :n:MAX (-n) #2147483647 ; :n:MIN (-n) #-2147483648 ; :n:zero? (n-f) #0 eq? ; :n:-zero? (n-f) #0 -eq? ; :n:negative? (n-f) #0 lt? ; :n:positive? (n-f) #-1 gt? ; :n:strictly-positive? (n-f) #0 gt? ; :n:even? (n-f) #2 /mod drop n:zero? ; :n:odd? (n-f) #2 /mod drop n:-zero? ; ~~~ ## More Stack Shufflers. `rot` rotates the top three values. High level: :rot (abc-bca) [ swap ] dip swap ; And low level, for inlining: ~~~ :rot (abc-bca) `67503109 ; primitive ~~~ ## Numeric Operations The core Rx language provides addition, subtraction, multiplication, and a combined division/remainder. Retro expands on this. I implement the division and remainder as low level words so they can be inlined. Here's the high level forms: :/ (nq-d) /mod nip ; :mod (nq-r) /mod drop ; ~~~ :/ (nq-d) `197652 ; primitive :mod (nq-r) `788 ; primitive :not (n-n) #-1 xor ; :n:pow (bp-n) #1 swap [ over * ] times nip ; :n:negate (n-n) #-1 * ; :n:square (n-n) dup * ; :n:sqrt (n-n) #1 [ repeat dup-pair / over - #2 / 0; + again ] call nip ; :n:min (nn-n) dup-pair lt? [ drop ] [ nip ] choose ; :n:max (nn-n) dup-pair gt? [ drop ] [ nip ] choose ; :n:abs (n-n) dup n:negate n:max ; :n:limit (nlu-n) swap push n:min pop n:max ; :n:inc (n-n) #1 + ; :n:dec (n-n) #1 - ; :n:between? (nul-) rot [ rot rot n:limit ] sip eq? ; ~~~ Some of the above, like `n:inc`, are useful with variables. But it's messy to execute sequences like: @foo n:inc !foo The `v:` namespace provides words which simplify the overall handling of variables. With this, the above can become simply: &foo v:inc ~~~ :v:inc-by (na-) [ fetch + ] sip store ; :v:dec-by (na-) [ fetch swap - ] sip store ; :v:inc (n-n) #1 swap v:inc-by ; :v:dec (n-n) #1 swap v:dec-by ; :v:limit (alu-) push push dup fetch pop pop n:limit swap store ; :v:on (a-) TRUE swap store ; :v:off (a-) FALSE swap store ; :allot (n-) &Heap v:inc-by ; ~~~ `v:preserve` is a combinator that executes a quotation while preserving the contents of a variable. E.g., instead of: @Base [ #16 !Base ... ] dip !Base You can do: &Base [ #16 !Base ... ] v:preserve This is primarily to aid in readability. I find it to be helpful when revisiting older code as it makes the intent a bit clearer. ~~~ :v:preserve (aq-) swap dup fetch [ [ call ] dip ] dip swap store ; ~~~ If you need to update a stored variable there are two typical forms: #1 'Next var @Next #10 * !Next Or: #1 'Next var &Next [ fetch #10 * ] sip store `v:update-using` replaces this with: #1 'Next var &Next [ #10 * ] v:update-using It takes care of preserving the variable address, fetching the stored value, and updating with the resulting value. ~~~ :v:update-using (aq-) swap [ fetch swap call ] sip store ; ~~~ I have a simple word `copy` which copies memory to another location. ~~~ :copy (aan-) [ &fetch-next dip store-next ] times drop drop ; ~~~ ## Lexical Scope Now for something tricky: a system for lexical scoping. The dictionary is a simple linked list. Retro allows for some control over what is visible using the `{{`, `---reveal---`, and `}}` words. As an example: {{ :increment dup fetch n:inc swap store ; :Value `0 ; data ---reveal--- :next-number @Value &Value increment ; }} Only the `next-number` function will remain visible once `}}` is executed. It's important to note that this only provides a *lexical* scope. Any variables are *global* (though the names may be hidden), so use `v:preserve` if you need reentrancy. ~~~ :ScopeList `0 `0 ; :{{ (-) d:last dup &ScopeList store-next store ; :---reveal--- (-) d:last &ScopeList n:inc store ; :}} (-) &ScopeList fetch-next swap fetch eq? [ @ScopeList !Dictionary ] [ @ScopeList [ &Dictionary repeat fetch dup fetch &ScopeList n:inc fetch -eq? 0; drop again ] call store ] choose ; ~~~ ## Linear Buffers A buffer is a linear memory buffer. Retro provides a `buffer:` namespace for working with them. This is something I've used for years. It's simple, but makes it easy to construct strings (as it writes a trailing ASCII null) and other simple structures. | word | used for | | --------------- | -------------------------------------- | | buffer:start | return the first address in the buffer | | buffer:end | return the last address in the buffer | | buffer:add | add a value to the end of the buffer | | buffer:get | remove & return the last value | | buffer:empty | remove all values from the buffer | | buffer:size | return the number of stored values | | buffer:set | set an address as the start of the | | | buffer | | buffer:preserve | preserve the current buffer pointers & | | | execute a quotation that may set a new | | | buffer. restores the saved pointers | | | when done | ~~~ {{ :Buffer `0 ; data :Ptr `0 ; data :terminate (-) #0 @Ptr store ; ---reveal--- :buffer:start (-a) @Buffer ; :buffer:end (-a) @Ptr ; :buffer:add (c-) buffer:end store &Ptr v:inc terminate ; :buffer:get (-c) &Ptr v:dec buffer:end fetch terminate ; :buffer:empty (-) buffer:start !Ptr terminate ; :buffer:size (-n) buffer:end buffer:start - ; :buffer:set (a-) !Buffer buffer:empty ; :buffer:preserve (q-) @Buffer @Ptr [ [ call ] dip !Buffer ] dip !Ptr ; }} ~~~ ## Strings Traditional Forth systems have a messy mix of strings. You have counted strings, address/length pairs, and sometimes other forms. Retro uses zero terminated strings. Counted strings are better in many ways, but I've used these for years and they are a workable approach. (Though caution in needed to avoid buffer overflow). Temporary strings are allocated in a circular pool (`STRINGS`). This space can be altered as needed by adjusting these variables. ~~~ :TempStrings ; data #32 !TempStrings :TempStringMax ; data #512 !TempStringMax :STRINGS EOM @TempStrings @TempStringMax * - ; {{ :Current `0 ; data :s:pointer (-p) @Current @TempStringMax * STRINGS + ; :s:next (-) &Current v:inc @Current @TempStrings eq? [ #0 !Current ] if ; ---reveal--- :s:temp (s-s) dup s:length n:inc s:pointer swap copy s:pointer s:next ; :s:empty (-s) s:pointer s:next #0 over store ; }} ~~~ Permanent strings are compiled into memory. To skip over them a helper function is used. When compiled into a definition this will look like: i lica.... r s:skip d 98 d 99 d 100 d 0 It'd be faster to compile a jump over the string instead. I use this approach as it makes it simpler to identify strings when debugging. `s:skip` is the helper function which adjusts the Nga instruction pointer to skip to the code following the stored string. ~~~ :s:skip (-) pop [ fetch-next n:-zero? ] while n:dec push ; :s:keep (s-s) compiling? [ &s:skip compile:call ] if here [ s, ] dip class:data ; ~~~ And now a quick `'` prefix. (This will be replaced later). What this does is either move the string token to the temporary buffer or compile it into the current definition. This doesn't support spaces. I use underscores instead. E.g., 'Hello_World! Later in the code I'll add a better implementation which can handle conversion of _ into spaces. ~~~ :prefix:' compiling? [ s:keep ] [ s:temp ] choose ; immediate ~~~ `s:chop` removes the last character from a string. ~~~ :s:chop (s-s) s:temp dup s:length over + n:dec #0 swap store ; ~~~ `s:reverse` reverses the order of a string. E.g., 'hello -> 'olleh ~~~ :s:reverse (s-s) [ dup s:temp buffer:set &s:length [ dup s:length + n:dec ] bi swap [ dup fetch buffer:add n:dec ] times drop buffer:start s:temp ] buffer:preserve ; ~~~ Trimming removes leading (`s:trim-left`) or trailing (`s:trim-right`) spaces from a string. `s:trim` removes both leading and trailing spaces. ~~~ :s:trim-left (s-s) s:temp [ fetch-next [ #32 eq? ] [ n:-zero? ] bi and ] while n:dec ; :s:trim-right (s-s) s:temp s:reverse s:trim-left s:reverse ; :s:trim (s-s) s:trim-right s:trim-left ; ~~~ `s:prepend` and `s:append` for concatenating strings together. ~~~ :s:prepend (ss-s) s:temp [ dup s:length + [ dup s:length n:inc ] dip swap copy ] sip ; :s:append (ss-s) swap s:prepend ; ~~~ `s:for-each` executes a quote once for each cell in string. It is a key part of building the other high-level string operations. ~~~ :s:for-each (sq-) [ repeat over fetch 0; drop dup-pair [ [ &fetch dip call ] dip ] dip [ n:inc ] dip again ] call drop-pair ; ~~~ Building on `s:for-each`, I am able to implement `s:index-of`, which finds the first instance of a character in a string. ~~~ :s:index-of (sc-n) swap [ repeat fetch-next 0; swap [ over -eq? ] dip swap 0; drop again ] sip [ - n:dec nip ] sip s:length over eq? [ drop #-1 ] if ; ~~~ `s:contains-char?` returns a flag indicating whether or not a given character is in a string. ~~~ :s:contains-char? (sc-f) s:index-of #-1 -eq? ; ~~~ `s:contains-string?` returns a flag indicating whether or not a given substring is in a string. ~~~ {{ 'Src var 'Tar var 'Pad var 'I var 'F var 'At var :terminate (-) #0 @Pad @Tar s:length + store ; :extract (-) @Src @I + @Pad @Tar s:length copy ; :compare (-) @Pad @Tar s:eq? @F or !F @F [ @I !At ] -if ; :next (-) &I v:inc ; ---reveal--- :s:contains-string? (ss-f) !Tar !Src s:empty !Pad #0 !I #0 !F @Src s:length [ extract terminate compare next ] times @F ; :s:index-of-string (ss-a) !Tar !Src s:empty !Pad #0 !I #0 !F #-1 !At @Src s:length [ extract terminate compare next ] times @F [ @At ] [ #-1 ] choose ; }} ~~~ `s:filter` returns a new string, consisting of the characters from another string that are filtered by a quotation. 'This_is_a_test [ c:-vowel? ] s:filter ~~~ :s:filter (sq-s) [ s:empty buffer:set swap [ dup-pair swap call [ buffer:add ] [ drop ] choose ] s:for-each drop buffer:start ] buffer:preserve ; ~~~ `s:map` Return a new string resulting from applying a quotation to each character in a source string. 'This_is_a_test [ $_ [ ASCII:SPACE ] case ] s:map ~~~ :s:map (sq-s) [ s:empty buffer:set swap [ over call buffer:add ] s:for-each drop buffer:start ] buffer:preserve ; ~~~ `s:substr` returns a subset of a string. Provide it with a string, a starting offset, and a length. ~~~ :s:substr (sfl-s) [ + s:empty ] dip [ over [ copy ] dip ] sip over [ + #0 swap store ] dip ; ~~~ `s:right` and `s:left` are similar to `s:substr`, but operate from fixed ends of the string. ~~~ :s:right (sn-s) over s:length over - swap s:substr ; :s:left (sn-s) #0 swap s:substr ; ~~~ Hash (using DJB2) I use the djb2 hash algorithm for computing hashes from strings. There are better hashes out there, but this is pretty simple and works well for my needs. This was based on an implementation at http://www.cse.yorku.ca/~oz/hash.html ~~~ :s:hash (s-n) #5381 swap [ swap #33 * + ] s:for-each ; ~~~ Copy a string, including the terminator. ~~~ :s:copy (ss-) over s:length n:inc copy ; ~~~ RETRO provides string constants for several ranges of characters that are of some general interest. ~~~ :s:DIGITS (-s) '0123456789 ; :s:ASCII-LOWERCASE (-s) 'abcdefghijklmnopqrstuvwxyz ; :s:ASCII-UPPERCASE (-s) 'ABCDEFGHIJKLMNOPQRSTUVWXYZ ; :s:ASCII-LETTERS (-s) 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ ; :s:PUNCTUATION (-s) '_!"#$%&'()*+,-./:;<=>?@[\]^`{|}~ $_ over store ; 's:WHITESPACE d:create #32, #9 , #10 , #13 , #0 , ~~~ ## ASCII Constants Not all characters can be obtained via the $ prefix. ASCII has many characters that aren't really intended to be printable. Retro has an `ASCII` namespace providing symbolic names for these. ~~~ #0 'ASCII:NUL const #1 'ASCII:SOH const #2 'ASCII:STX const #3 'ASCII:ETX const #4 'ASCII:EOT const #5 'ASCII:ENQ const #6 'ASCII:ACK const #7 'ASCII:BEL const #8 'ASCII:BS const #9 'ASCII:HT const #10 'ASCII:LF const #11 'ASCII:VT const #12 'ASCII:FF const #13 'ASCII:CR const #14 'ASCII:SO const #15 'ASCII:SI const #16 'ASCII:DLE const #17 'ASCII:DC1 const #18 'ASCII:DC2 const #19 'ASCII:DC3 const #20 'ASCII:DC4 const #21 'ASCII:NAK const #22 'ASCII:SYN const #23 'ASCII:ETB const #24 'ASCII:CAN const #25 'ASCII:EM const #26 'ASCII:SUB const #27 'ASCII:ESC const #28 'ASCII:FS const #29 'ASCII:GS const #30 'ASCII:RS const #31 'ASCII:US const #32 'ASCII:SPACE const #127 'ASCII:DEL const ~~~ These words operate on character values. Retro currently deals with ASCII, though cells are 32 bits in length, so Unicode values can be stored. First are a bunch of words to help identify character values. ~~~ :c:letter? (c-f) $A $z n:between? ; :c:lowercase? (c-f) $a $z n:between? ; :c:uppercase? (c-f) $A $Z n:between? ; :c:digit? (c-f) $0 $9 n:between? ; :c:visible? (c-f) #31 #126 n:between? ; :c:vowel? (c-f) 'aeiouAEIOU swap s:contains-char? ; :c:consonant? (c-f) dup c:letter? [ c:vowel? not ] [ drop FALSE ] choose ; {{ 'WS d:create ASCII:SPACE , ASCII:HT , ASCII:LF , ASCII:CR , #0 , ---reveal--- :c:whitespace? (c-f) &WS swap s:contains-char? ; }} ~~~ And the inverse forms. (These are included for readability and orthiginal completion). ~~~ :c:-lowercase? (c-f) c:lowercase? not ; :c:-uppercase? (c-f) c:uppercase? not ; :c:-digit? (c-f) c:digit? not ; :c:-whitespace? (c-f) c:whitespace? not ; :c:-visible? (c-f) c:visible? not ; :c:-vowel? (c-f) c:vowel? not ; :c:-consonant? (c-f) c:consonant? not ; ~~~ The next few words perform simple transformations. ~~~ :c:to-upper (c-c) dup c:lowercase? 0; drop ASCII:SPACE - ; :c:to-lower (c-c) dup c:uppercase? 0; drop ASCII:SPACE + ; :c:to-string (c-s) '. s:temp [ store ] sip ; :c:toggle-case (c-c) dup c:lowercase? [ c:to-upper ] [ c:to-lower ] choose ; :c:to-number (c-n) dup c:digit? [ $0 - ] [ drop #0 ] choose ; ~~~ ## Back to Strings With the character transformations a few more string words are possible. ~~~ :s:to-upper (s-s) [ c:to-upper ] s:map ; :s:to-lower (s-s) [ c:to-lower ] s:map ; ~~~ Convert a decimal (base 10) number to a string. ~~~ {{ 'Value var :correct (c-c) dup $0 lt? [ $0 over - #2 * + ] if ; ---reveal--- :n:to-string (n-s) [ here buffer:set dup !Value n:abs [ #10 /mod swap $0 + correct buffer:add dup n:-zero? ] while drop @Value n:negative? [ $- buffer:add ] if buffer:start s:reverse s:temp ] buffer:preserve ; }} ~~~ Now replace the old prefix:' with this one that can optionally turn underscores into spaces. ~~~ TRUE 'RewriteUnderscores var {{ :sub (c-c) $_ [ ASCII:SPACE ] case ; :rewrite (s-s) @RewriteUnderscores [ &sub s:map ] if &prefix:' call ; ---reveal--- :prefix:' rewrite ; immediate }} ~~~ The `s:split` splits a string on the first instance of a given character. Results are undefined if the character can not be located. ~~~ :s:split (sc-ss) dup-pair s:index-of nip dup-pair s:left [ + ] dip ; :s:split-on-string (ss-ss) dup-pair s:index-of-string n:inc nip dup-pair s:left [ + ] dip ; :s:replace (sss-s) over s:length here store [ s:split-on-string swap here fetch + ] dip s:prepend s:append ; ~~~ `s:tokenize` takes a string and a character to use as a separator. It splits the string into a set of substrings and returns a set containing pointers to each of them. ~~~ {{ 'Split-On var :match? (c-f) @Split-On eq? ; :terminate (s-s) #0 over n:dec store ; :step (ss-s) [ n:inc ] dip match? [ dup , terminate ] if ; ---reveal--- :s:tokenize (sc-a) !Split-On s:keep here #0 , [ dup , dup [ step ] s:for-each drop ] dip here over - n:dec over store ; }} ~~~ `s:tokenize-on-string` is like `s:tokenize`, but for strings. ~~~ {{ 'Tokens var 'Needle var :-match? (s-sf) dup @Needle s:contains-string? ; :save-token (s-s) @Needle s:split-on-string s:keep buffer:add n:inc ; :tokens-to-set (-a) here @Tokens buffer:size dup , [ fetch-next , ] times drop ; ---reveal--- :s:tokenize-on-string (ss-a) [ s:keep !Needle here #8192 + !Tokens @Tokens buffer:set [ repeat -match? 0; drop save-token again ] call s:keep buffer:add tokens-to-set ] buffer:preserve ; }} ~~~ Use `s:format` to construct a string from multiple items. This can be illustrated with: #4 #6 #10 '%n-%n=%n\n s:format The format language is simple: | \r | Replace with a CR | | \n | Replace with a LF | | \t | Replace with a TAB | | \\ | Replace with a single \ | | \ | Replace with an underscore (_) | | \0 | Replace with NUL | | %c | Replace with a character on the stack | | %s | Replace with a string on the stack | | %n | Replace with the next number on the stack | ~~~ {{ :char (c-) ASCII:SPACE [ $_ buffer:add ] case $r [ ASCII:CR buffer:add ] case $n [ ASCII:LF buffer:add ] case $t [ ASCII:HT buffer:add ] case $0 [ ASCII:NUL buffer:add ] case buffer:add ; :string (a-a) repeat fetch-next 0; buffer:add again ; :type (aac-) $c [ swap buffer:add ] case $s [ swap string drop ] case $n [ swap n:to-string string drop ] case drop ; :handle (ac-a) $\ [ fetch-next char ] case $% [ fetch-next type ] case buffer:add ; ---reveal--- :s:format (...s-s) [ s:empty [ buffer:set [ repeat fetch-next 0; handle again ] call drop ] sip ] buffer:preserve ; }} ~~~ ~~~ :s:const (ss-) [ s:keep ] dip const ; ~~~ ## The Ultimate Stack Shuffler Ok, This is a bit of a hack, but very useful at times. Assume you have a bunch of values: #3 #1 #2 #5 And you want to reorder them into something new: #1 #3 #5 #5 #2 #1 Rather than using a lot of shufflers, `reorder` simplfies this into: #3 #1 #2 #5 'abcd 'baddcb reorder ~~~ {{ 'Values var #27 allot :from s:length dup [ [ &Values + store ] sip n:dec ] times drop ; :to dup s:length [ fetch-next $a - n:inc &Values + fetch swap ] times drop ; ---reveal--- :reorder (...ss-?) [ from ] dip to ; }} ~~~ ## Extending The Language `does` is intended to be paired with `d:create` to attach an action to a newly created data structure. An example use might be something like: :constant (ns-) d:create , [ fetch ] does ; In a traditional Forth this is similar in spirit to DOES>. ~~~ :curry (vp-p) here [ swap compile:lit compile:call compile:ret ] dip ; :does (q-) d:last swap curry d:last d:xt store &class:word reclass ; ~~~ `d:for-each` is a combinator which runs a quote once for each header in the dictionary. A pointer to each header will be passed to the quote as it is run. This can be used for implementing `words`: [ d:name s:put sp ] d:for-each Or finding the length of the longest name in the dictionary: #0 [ d:name s:length n:max ] d:for-each It's a handy combinator that lets me quickly walk though the entire dictionary in a very clean manner. ~~~ :d:for-each (q-) &Dictionary [ repeat fetch 0; dup-pair [ [ swap call ] dip ] dip again ] call drop ; ~~~ Using `d:for-each`, I implement a means of looking up a dictionary header by the `d:xt` field. ~~~ :d:lookup-xt (a-d) #0 swap [ dup-pair d:xt fetch eq? [ swap &nip dip ] &drop choose ] d:for-each drop ; ~~~ ## Sets Sets are statically sized arrays. They are represented in memory as: count data #1 (first) ... data #n (last) Since the count comes first, a simple `fetch` will suffice to get it, but for completeness (and to allow for future changes), we wrap this as `set:length`: ~~~ :set:length (a-n) fetch ; ~~~ ~~~ :set:counted-results (q-a) call here [ dup , &, times ] dip ; ~~~ The first couple of words are used to create sets. The first, `set:from-results` executes a quote and constructs a set from the returned values. ~~~ :set:from-results (q-a) depth [ call ] dip depth swap - here [ dup , [ , ] times ] dip ; ~~~ The second, `set:from-string`, creates a new string with the characters in given a string. ~~~ :set:from-string (s-a) here [ dup s:length , [ , ] s:for-each ] dip ; ~~~ A very crucial piece is `set:for-each`. This runs a quote once against each value in a set. This is leveraged to implement additional combinators. ~~~ {{ 'Q var ---reveal--- :set:for-each (aq-) &Q [ !Q fetch-next [ fetch-next swap [ @Q call ] dip ] times drop ] v:preserve ; }} ~~~ With this I can easily define `set:dup` to make a copy of a set. ~~~ :set:dup (a-a) here [ dup fetch , [ , ] set:for-each ] dip ; ~~~ Next is `set:filter`, which is extracts matching values from a set. This is used like: { #1 #2 #3 #4 #5 #6 #7 #8 } [ n:even? ] set:filter It returns a new set with the values that the quote returned a `TRUE` flag for. ~~~ :set:filter (aq-) [ over [ call ] dip swap [ , ] [ drop ] choose ] curry here [ over fetch , set:for-each ] dip here over - n:dec over store ; ~~~ Next are `set:contains?` and `set:contains-string?` which compare a given value to each item in the array and returns a flag. ~~~ {{ 'F var ---reveal--- :set:contains? (na-f) &F v:off [ over eq? @F or !F ] set:for-each drop @F ; :set:contains-string? (na-f) &F v:off [ over s:eq? @F or !F ] set:for-each drop @F ; }} ~~~ I implemented `set:map` to apply a quotation to each item in a set and construct a new set from the returned values. Example: { #1 #2 #3 } [ #10 * ] set:map ~~~ :set:map (aq-a) [ call , ] curry here [ over fetch , set:for-each ] dip ; ~~~ You can use `set:reverse` to make a copy of a set with the values reversed. This can be useful after a `set:from-results`. ~~~ :set:reverse (a-a) here [ fetch-next [ + n:dec ] sip dup , [ dup fetch , n:dec ] times drop ] dip ; ~~~ `set:nth` provides a quick means of adjusting a set and offset into an address for use with `fetch` and `store`. ~~~ :set:nth (an-a) + n:inc ; ~~~ `set:reduce` takes a set, a starting value, and a quote. It executes the quote once for each item in the set, passing the item and the value to the quote. The quote should consume both and return a new value. ~~~ :set:reduce (pnp-n) [ swap ] dip set:for-each ; ~~~ When making a set, I often want the values in the original order. The `set:from-results set:reverse` is a bit long, so I'm defining a new `set:make` which wraps these. ~~~ :set:make (q-a) set:counted-results set:reverse ; :{ (-) |[ |depth |[ ; immediate :} (-a) |] |dip |depth |swap |- |n:dec |] |set:make ; immediate ~~~ ## Muri: an assembler Muri is my minimalist assembler for Nga. This is an attempt to implement something similar in Retro. This requires some knowledge of the Nga architecture to be useful. The major elements are: **Instruction Set** Nga has 27 instructions. These are: 0 nop 7 jump 14 gt 21 and 1 lit 8 call 15 fetch 22 or 2 dup 9 ccall 16 store 23 xor 3 drop 10 return 17 add 24 shift 4 swap 11 eq 18 sub 25 zret 5 push 12 neq 19 mul 26 end 6 pop 13 lt 20 divmod The mnemonics allow for each name to be reduced to just two characters. In the same order as above: no ju gt an li ca fe or du cc st xo dr re ad sh sw eq su zr pu ne mu en po lt di Up to four instructions can be packed into a single memory location. (You can only use *no*p after a *ju*mp, *ca*ll, *cc*all, *re*t, or *zr*et as these alter the instruction pointer.) So a bundled sequence like: lit 100 lit 200 add ret Would look like: 'liliadre i 100 d 200 d And: lit s:eq? call Would become: 'lica.... i 's:eq? r Note the use of `..` instead of `no` for the nop's; this is done to improve readability a little. Instruction bundles are specified as strings, and are converted to actual instructions by the `i` word. As in the standard Muri assembler, the RETRO version uses `d` for decimal values and `r` for references to named functions. This is kept in the global namespace, but several portions are kept private. ~~~ {{ ~~~ I allocate a small buffer for each portion of an instruction bundle. ~~~ 'I0 d:create #3 allot 'I1 d:create #3 allot 'I2 d:create #3 allot 'I3 d:create #3 allot ~~~ The `opcode` word maps a two character instruction to an opcode number. ~~~ :opcode (s-n) '.. [ #0 ] s:case 'li [ #1 ] s:case 'du [ #2 ] s:case 'dr [ #3 ] s:case 'sw [ #4 ] s:case 'pu [ #5 ] s:case 'po [ #6 ] s:case 'ju [ #7 ] s:case 'ca [ #8 ] s:case 'cc [ #9 ] s:case 're [ #10 ] s:case 'eq [ #11 ] s:case 'ne [ #12 ] s:case 'lt [ #13 ] s:case 'gt [ #14 ] s:case 'fe [ #15 ] s:case 'st [ #16 ] s:case 'ad [ #17 ] s:case 'su [ #18 ] s:case 'mu [ #19 ] s:case 'di [ #20 ] s:case 'an [ #21 ] s:case 'or [ #22 ] s:case 'xo [ #23 ] s:case 'sh [ #24 ] s:case 'zr [ #25 ] s:case 'en [ #26 ] s:case 'ie [ #27 ] s:case 'iq [ #28 ] s:case 'ii [ #29 ] s:case drop #0 ; ~~~ I use `pack` to combine the individual parts of the instruction bundle into a single cell. ~~~ :pack (-n) &I0 opcode &I1 opcode &I2 opcode &I3 opcode #-24 shift swap #-16 shift + swap #-8 shift + swap + ; ~~~ Switch to the public portion of the code. ~~~ ---reveal--- ~~~ With this it's pretty easy to implement the instruction bundle handler. Named `i`, this takes a string with four instruction names, splits it into each part, calls `opcode` on each and then `pack` to combine them before using `,` to write them into the `Heap`. ~~~ :i (s-) dup &I0 #2 copy #2 + dup &I1 #2 copy #2 + dup &I2 #2 copy #2 + &I3 #2 copy pack , ; ~~~ The `d` word inlines a data item. ~~~ :d (n-) , ; ~~~ And `r` inlines a reference (pointer). ~~~ :r (s-) d:lookup d:xt fetch , ; ~~~ The final bits are `as{` and `}as`, which start and stop the assembler. (Basically, they just turn the `Compiler` on and off, restoring its state as needed). ~~~ :as{ (-f) @Compiler &Compiler v:off ; immediate :}as (f-?) !Compiler ; immediate ~~~ This finishes by sealing off the private words. ~~~ }} ~~~ ## Evaluating Source The standard interfaces have their own approaches to getting and dealing with user input. Sometimes though it'd be nicer to have a way of evaluating code from within RETRO itself. This provides an `evaluate` word. ~~~ {{ ~~~ First, create a buffer for the string to be evaluated. This is sized to allow for a standard FORTH block to fit, or to easily fit a traditional 1024 character block. It's also long enough for most source lines I expect to encounter when working with files. I allocate this immediately prior to the temporary string buffers. ~~~ :current-line (-a) STRINGS #1025 - ; ~~~ To make use of this, we need to know how many tokens are in the input string. `count-tokens` takes care of this by filtering out anything other than spaces and getting the size of the remaining string. ~~~ :count-tokens (s-n) [ ASCII:SPACE eq? ] s:filter s:length ; ~~~ The `next-token` word splits the remainimg string on SPACE and returns both parts. ~~~ :next-token (s-ss) ASCII:SPACE s:split ; ~~~ And then the `process-tokens` uses `next-token` and `interpret` to go through the string, processing each token in turn. Using the standard `interpret` word allows for proper handling of the prefixes and classes so everything works just as if entered directly. ~~~ :process-tokens (sn-) [ next-token swap [ dup s:length n:-zero? &interpret &drop choose ] dip n:inc ] times interpret ; ~~~ ~~~ ---reveal--- ~~~ And finally, tie it all together into the single exposed word `evaluate`. ~~~ :s:evaluate (s-...) current-line s:copy current-line dup count-tokens process-tokens ; ~~~ ~~~ }} ~~~ ## Loops, continued Sometimes it's useful to be able to access a loop index. The next word, `times` adds this to RETRO. It also provides `I`, `J`, and `K` words to access the index of the current, and up to two outer loops as well. ~~~ {{ 'LP var 'Index d:create #128 allot :next (-) @LP &Index + v:inc ; :prep (-) &LP v:inc #0 @LP &Index + store ; :done (-) &LP v:dec ; ---reveal--- :I (-n) @LP &Index + fetch ; :J (-n) @LP &Index + n:dec fetch ; :K (-n) @LP &Index + #2 - fetch ; :times prep swap [ repeat 0; n:dec push &call sip pop next again ] call drop done ; }} ~~~ ## I/O ~~~ :io:enumerate (-n) as{ 'ie...... i }as ; :io:query (n-mN) as{ 'iq...... i }as ; :io:invoke (n-) as{ 'ii...... i }as ; {{ 'Slot var ---reveal--- :io:scan-for (n-m) #-1 !Slot io:enumerate [ I io:query nip over eq? [ I !Slot ] if ] times drop @Slot ; }} ~~~ A Retro system is only required to provide a single I/O word to the user: a word to push a single character to the output log. This is always mapped to device 0, and is exposed as `c:putc`. ~~~ :c:put (c-) #0 io:invoke ; ~~~ This can be used to implement words that push other items to the log. ~~~ :nl (-) ASCII:LF c:put ; :sp (-) ASCII:SPACE c:put ; :tab (-) ASCII:HT c:put ; :s:put (s-) [ c:put ] s:for-each ; :n:put (n-) n:to-string s:put ; ~~~ An interface layer may provide additional I/O words, but these will not be implemented here as they are not part of the core language. ## Debugging Aids I provide a few debugging aids in the core language. The examples provide much better tools, and interface layers can provide much more than I can do here. ~~~ :d:words (-) [ d:name s:put sp ] d:for-each ; :reset (...-) depth repeat 0; push drop pop #1 - again ; :dump-stack (-) depth 0; drop push dump-stack pop dup n:put sp ; ~~~ From Kiyoshi Yoneda, this is a variant of `d:words` which displays words containing a specific substring. It's useful to see words in a specific namespace, e.g., by doing `'s: d:words-with`, or words that likely display something: `':puts d:words-with`. ~~~ {{ :display-if-matched (s-) dup here s:contains-string? [ s:put sp ] [ drop ] choose ; ---reveal--- :d:words-with (s-) here s:copy [ d:name display-if-matched ] d:for-each ; }} ~~~ ~~~ :FREE (-n) STRINGS #1025 - here - ; ~~~ ## The End ## Legalities Permission to use, copy, modify, and/or distribute this software for any purpose with or without fee is hereby granted, provided that the copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Copyright (c) 2008 - 2019, Charles Childers Copyright (c) 2012 - 2013, Michal J Wallace Copyright (c) 2009 - 2011, Luke Parrish Copyright (c) 2009 - 2010, JGL Copyright (c) 2010 - 2011, Marc Simpson Copyright (c) 2011 - 2012, Oleksandr Kozachuk Copyright (c) 2018, Kiyoshi Yoneda Copyright (c) 2010, Jay Skeer Copyright (c) 2010, Greg Copeland Copyright (c) 2011, Aleksej Saushev Copyright (c) 2011, Foucist Copyright (c) 2011, Erturk Kocalar Copyright (c) 2011, Kenneth Keating Copyright (c) 2011, Ashley Feniello Copyright (c) 2011, Peter Salvi Copyright (c) 2011, Christian Kellermann Copyright (c) 2011, Jorge Acereda Copyright (c) 2011, Remy Moueza Copyright (c) 2012, John M Harrison Copyright (c) 2012, Todd Thomas